filename: tfs 1007.doc version 1.4 02.12.2008 vectron international filter specification tfs 1007 1/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout measurement condition ambient temperature: 23 c input pow er level: 0 dbm terminating impedance: input: 50 ? output: 50 ? ch aracteristics remark: the reference lev e l for the relativ e attenuation a rel of the tfs 1007 is the minimum attenuation in the pass band. the max i mum attenuation in the pass band is defined as the insertion loss a e . the nominal frequency f n is fix ed at 1007,1 mhz w i thout any tolerance or limit. the v a lues of relativ e attenuation a rel are guaranteed for the w hole operating temper ature range. the frequency shift of the f ilter in the operating temperature range is included in the production tolerance scheme. d a t a ty p. v a lue tolerance / limit insertion loss a e 2 , 0 d b m a x . 3 , 0 d b nominal frequency f n - 1 0 0 7 , 1 m h z passband p b - f n 12,5 mhz pass band ripple 0 , 9 d b m a x . 1 , 5 d b relativ e attenuation a rel 1 0 m h z . . . 8 6 2 m h z 3 4 d b m i n . 2 0 d b 1 1 5 2 m h z . . . 2 0 0 0 m h z 3 7 d b m i n . 2 0 d b return loss w i thin pb 1 2 d b m i n . 1 0 d b input pow er lev e l - max . 1 0 d b m operating temperature range otr - - 40 c ... + 85 c storage temperature range - - 40 c ... + 85 c temperature coefficient of frequency t c f * -42 ppm/k - *) ? f(h z ) = tc f (ppm/k) x (t-t 0 ) x f to (mhz) ge ne ra te d: ch ecked / a p p r o v ed : notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1007.doc version 1.4 02.12.2008 vectron international filter specification tfs 1007 2/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout f ilter ch aracteristic 98 7 99 1 99 5 99 9 10 03 10 07 10 11 10 15 10 19 10 23 10 27 -1 0 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 f r equency i n m h z m a g n it u d e in d b 98 7 99 1 99 5 99 9 10 03 10 07 10 11 10 15 10 19 10 23 10 27 1 1. 2 1. 4 1. 6 1. 8 2 2. 2 2. 4 2. 6 2. 8 3 f r equency i n m h z vsw r 0 cons truc tion a nd pin c onne c t ion (all dimensions in mm) 50 ? t est circu i t l 1 sa w l 2 2 5 1, 3, 4, 6 a07 w26 1 ground 2 input 3 ground 4 ground 5 output 6 ground date code: y ear + w eek w 2008 x 2009 a 2010 ... 0 20 40 60 80 100 120 140 160 180 200 - - - - - - - - - - m a gnit ude in db f r equency in m h z notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1007.doc version 1.4 02.12.2008 vectron international filter specification tfs 1007 3/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout stability characteristics, reliability after the follow i ng tests the filter shall meet the w hole specification: 1. shock: 500g, 1 ms, half sine w a ve, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respecti vely , 1 octave per min, 10 cy cles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cy cles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow ): reflow possible: three times max.; for temperature conditions refer to the attac hed "air reflow temperature conditions" on page 4; this filter is rohs compliant (2002/95/eg, 2005/618/eg) packin g tape & reel: iec 286 ? 3, w i th exception of value for n and minimum bending radius; tape ty pe ii, embossed carrier tape w i th top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao p u l l o ff di r e c t io n pi n m a r k e r ty p da t e c o d e ko t tape (al l di mensi ons i n mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 a o : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 a c n w 1 w 2 r eel (all d i men s io n s in mm) a : 330 w 1 : 8,4 + 1 ,5/-0 w 2 (max ) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2 the minimum bending radius is 45 mm. notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1007.doc version 1.4 02.12.2008 vectron international filter specification tfs 1007 4/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout a i r re flow te mpe r a t ure c onditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c betw een 300 and 600 seconds > 150c betw een 240 and 500 seconds > 217c betw een 30 and 150 seconds peak temperature max. 260c time w i thin 5c of actual peak temperature betw een 10 and 30 seconds cool-dow n rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds chip-mount air reflow profile temperature / c max. 260c 217c time / s max. 300 s 10 ... 30 s 30 ... 150 s notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1007.doc version 1.4 02.12.2008 vectron international filter specification tfs 1007 5/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout history version reason of changes name date 1.0 - generation of development s pecification strehl 16.05.2007 1.1 - change construction strehl 18.06.2007 1.2 - change input pow er level strehl 27.08.2007 - change return loss 1.3 - generation of filter specification - added ty pical values and filter characteristic noack 27.06.2008 1.4 - change relative attenuation and return loss strehl 02.12.2008 notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
|
